Overview
This Bilco S-50TB is a 36in x 30in thermally broken ladder access roof hatch (aluminum). The Bilco Type S is the standard 36in x 30in roof hatch for reaching the roof from a fixed interior ladder. Spring operators balance the cover so it lifts with one hand, and the automatic hold-open arm locks it at 70 degrees while you climb through. This is the thermally broken version: the cover and curb are built to stop heat moving between the inside and outside metal, which resists condensation, and R-20+ polyisocyanurate insulation gives much better energy performance than a standard hatch.
- Opening Size: 36in x 30in
- Material: Aluminum
- Shipping Weight: 132 lb
- Lead Time: Stocked size: ships in approximately 7 days
- Warranty: 5 years
Features
- Thermally broken cover and curb limit heat transfer to resist harmful condensation
- R-20+ ozone-friendly polyisocyanurate insulation
- Special EPDM gasketing with improved weather and wind resistance
- Meets LEED® recycled-content standards; high solar reflectance index (SRI)
- Compression spring operators counterbalance the cover for smooth one-hand opening at any size
- Automatic hold-open arm locks the cover at 70 degrees for safe ladder access
- Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
- Corrosion-resistant construction for years of trouble-free service
- Heavy-gauge construction and a positive slam latch keep the roof secure
- Bil-Clip® flashing system on the curb makes securing single-ply roofing membrane fast and simple
- Order with a Bil-Guard® 2.0 safety railing or a LadderUP® safety post using the options above
Specifications
- Material: 11 gauge aluminum cover and frame
- Cover: Brake-formed hollow-metal cover with 3in concealed polyisocyanurate insulation (R-20+) and a 5in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 12in high with integral capflashing, 3in polyisocyanurate insulation (R-20+), welded corners and a 5-1/2in mounting flange with 7/16in holes
- Finish: Mill finish aluminum
- Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
- Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Slam latch with interior and exterior turn handles and padlock hasps
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
Options
Add a Bil-Guard® 2.0 safety railing or a LadderUP® safety post with the options above. Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.
Documentation
- Type S-50TB Submittal Drawing (PDF)
- Type S-50TB Specification (Word)
- Type S-50TB CAD Details (ZIP)
- Thermally Broken Roof Hatch Flyer (PDF)
- Type S Submittal Drawing (PDF)
- Type S Specification (Word)
- Type S CAD Details (ZIP)
- Single Leaf Roof Hatch BIM Model (Revit)
- Roof Hatch Installation Instructions (PDF)
- Roof Hatch Operation & Maintenance (PDF)
- Bil-Clip Flashing System Installation (PDF)
- Roof Hatch Size Chart (PDF)
- Curb Options for Roof Hatches and Smoke Vents (PDF)
- White Paper: Fire Ratings and Roof Hatches (PDF)
Ordering & Shipping
Stocked size: ships in approximately 7 days. Ships direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.
-
Description
Overview
This Bilco S-50TB is a 36in x 30in thermally broken ladder access roof hatch (aluminum). The Bilco Type S is the standard 36in x 30in roof hatch for reaching the roof from a fixed interior ladder. Spring operators balance the cover so it lifts with one hand, and the automatic hold-open arm locks it at 70 degrees while you climb through. This is the thermally broken version: the cover and curb are built to stop heat moving between the inside and outside metal, which resists condensation, and R-20+ polyisocyanurate insulation gives much better energy performance than a standard hatch.
- Opening Size: 36in x 30in
- Material: Aluminum
- Shipping Weight: 132 lb
- Lead Time: Stocked size: ships in approximately 7 days
- Warranty: 5 years
Features
- Thermally broken cover and curb limit heat transfer to resist harmful condensation
- R-20+ ozone-friendly polyisocyanurate insulation
- Special EPDM gasketing with improved weather and wind resistance
- Meets LEED® recycled-content standards; high solar reflectance index (SRI)
- Compression spring operators counterbalance the cover for smooth one-hand opening at any size
- Automatic hold-open arm locks the cover at 70 degrees for safe ladder access
- Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
- Corrosion-resistant construction for years of trouble-free service
- Heavy-gauge construction and a positive slam latch keep the roof secure
- Bil-Clip® flashing system on the curb makes securing single-ply roofing membrane fast and simple
- Order with a Bil-Guard® 2.0 safety railing or a LadderUP® safety post using the options above
Specifications
- Material: 11 gauge aluminum cover and frame
- Cover: Brake-formed hollow-metal cover with 3in concealed polyisocyanurate insulation (R-20+) and a 5in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 12in high with integral capflashing, 3in polyisocyanurate insulation (R-20+), welded corners and a 5-1/2in mounting flange with 7/16in holes
- Finish: Mill finish aluminum
- Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
- Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Slam latch with interior and exterior turn handles and padlock hasps
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
Options
Add a Bil-Guard® 2.0 safety railing or a LadderUP® safety post with the options above. Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.
Documentation
- Type S-50TB Submittal Drawing (PDF)
- Type S-50TB Specification (Word)
- Type S-50TB CAD Details (ZIP)
- Thermally Broken Roof Hatch Flyer (PDF)
- Type S Submittal Drawing (PDF)
- Type S Specification (Word)
- Type S CAD Details (ZIP)
- Single Leaf Roof Hatch BIM Model (Revit)
- Roof Hatch Installation Instructions (PDF)
- Roof Hatch Operation & Maintenance (PDF)
- Bil-Clip Flashing System Installation (PDF)
- Roof Hatch Size Chart (PDF)
- Curb Options for Roof Hatches and Smoke Vents (PDF)
- White Paper: Fire Ratings and Roof Hatches (PDF)
Ordering & Shipping
Stocked size: ships in approximately 7 days. Ships direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.