Overview
This Bilco L-20VM is a 30in x 96in VersaMount replacement roof hatch (galvanized steel). This VersaMount fits a 30in x 96in Bilco Type L opening (service stair access). The Bilco VersaMount® replaces a damaged roof hatch without re-roofing. Take the cover off the old hatch, set the VersaMount on top of the existing curb, and fasten it with the included anchor clips. Its low-profile curb has a built-in flange and apron for a fast, weathertight install.
- Opening Size: 30in x 96in
- Material: Galvanized Steel
- Shipping Weight: 429 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
Features
- Fits over the existing curb, so the roof membrane does not have to be disturbed
- Built-in apron sheds water over the old curb for a watertight installation
- Stainless steel anchor clips included for a fast, secure mount
- Compression spring operators counterbalance the cover for smooth one-hand opening at any size
- Automatic hold-open arm locks the cover open; release it with the grip handle
- Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
- Corrosion-resistant construction for years of trouble-free service
- Heavy-gauge construction and a positive slam latch keep the roof secure
Specifications
- Material: 14 gauge galvannealed steel cover and curb
- Finish: Alkyd red oxide primer
- Hardware: Zinc plated and chromate sealed
- Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 4in high brake-formed hollow-metal curb with 1in concealed fiberglass insulation, 2-5/8in mounting flange and 1-1/2in apron, welded at the corners; stainless steel anchor clips included
- Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Slam latch with interior and exterior turn handles and padlock hasps
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
Options
Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.
Documentation
- VersaMount Submittal Drawing (PDF)
- VersaMount Specification (Word)
- VersaMount Installation Instructions (PDF)
- VersaMount CAD Details (ZIP)
- Roof Hatch Operation & Maintenance (PDF)
- Roof Hatch Size Chart (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.
-
Description
Overview
This Bilco L-20VM is a 30in x 96in VersaMount replacement roof hatch (galvanized steel). This VersaMount fits a 30in x 96in Bilco Type L opening (service stair access). The Bilco VersaMount® replaces a damaged roof hatch without re-roofing. Take the cover off the old hatch, set the VersaMount on top of the existing curb, and fasten it with the included anchor clips. Its low-profile curb has a built-in flange and apron for a fast, weathertight install.
- Opening Size: 30in x 96in
- Material: Galvanized Steel
- Shipping Weight: 429 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
Features
- Fits over the existing curb, so the roof membrane does not have to be disturbed
- Built-in apron sheds water over the old curb for a watertight installation
- Stainless steel anchor clips included for a fast, secure mount
- Compression spring operators counterbalance the cover for smooth one-hand opening at any size
- Automatic hold-open arm locks the cover open; release it with the grip handle
- Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
- Corrosion-resistant construction for years of trouble-free service
- Heavy-gauge construction and a positive slam latch keep the roof secure
Specifications
- Material: 14 gauge galvannealed steel cover and curb
- Finish: Alkyd red oxide primer
- Hardware: Zinc plated and chromate sealed
- Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 4in high brake-formed hollow-metal curb with 1in concealed fiberglass insulation, 2-5/8in mounting flange and 1-1/2in apron, welded at the corners; stainless steel anchor clips included
- Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Slam latch with interior and exterior turn handles and padlock hasps
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
Options
Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.
Documentation
- VersaMount Submittal Drawing (PDF)
- VersaMount Specification (Word)
- VersaMount Installation Instructions (PDF)
- VersaMount CAD Details (ZIP)
- Roof Hatch Operation & Maintenance (PDF)
- Roof Hatch Size Chart (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.