Categories

30in x 96in, VersaMount Replacement Roof Hatch, Aluminum, Bilco L-50VM

Bilco

$4,229.40

30in x 96in, VersaMount Replacement Roof Hatch, Aluminum, Bilco L-50VM

Bilco

BIL-L-50VM-3096
$4,229.40
Hover Image to Zoom
SKU:
BIL-L-50VM-3096
UPC:
738447467086
Weight:
186.00 LBS
Shipping:
Calculated at Checkout
See Full Details

Made to order: ships in approximately 2-4 weeks

Adding to cart… The item has been added

Overview

This Bilco L-50VM is a 30in x 96in VersaMount replacement roof hatch (aluminum). This VersaMount fits a 30in x 96in Bilco Type L opening (service stair access). The Bilco VersaMount® replaces a damaged roof hatch without re-roofing. Take the cover off the old hatch, set the VersaMount on top of the existing curb, and fasten it with the included anchor clips. Its low-profile curb has a built-in flange and apron for a fast, weathertight install.

  • Opening Size: 30in x 96in
  • Material: Aluminum
  • Shipping Weight: 186 lb
  • Lead Time: Made to order: ships in approximately 2-4 weeks
  • Warranty: 5 years

Features

  • Fits over the existing curb, so the roof membrane does not have to be disturbed
  • Built-in apron sheds water over the old curb for a watertight installation
  • Stainless steel anchor clips included for a fast, secure mount
  • Compression spring operators counterbalance the cover for smooth one-hand opening at any size
  • Automatic hold-open arm locks the cover open; release it with the grip handle
  • Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
  • Corrosion-resistant construction for years of trouble-free service
  • Heavy-gauge construction and a positive slam latch keep the roof secure

Specifications

  • Material: 11 gauge aluminum cover and curb
  • Finish: Mill finish aluminum
  • Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
  • Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
  • Curb: 4in high brake-formed hollow-metal curb with 1in concealed fiberglass insulation, 2-5/8in mounting flange and 1-1/2in apron, welded at the corners; stainless steel anchor clips included
  • Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
  • Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
  • Latch: Slam latch with interior and exterior turn handles and padlock hasps
  • Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release

Options

Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.

Documentation

Ordering & Shipping

Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.

  • Description

    Overview

    This Bilco L-50VM is a 30in x 96in VersaMount replacement roof hatch (aluminum). This VersaMount fits a 30in x 96in Bilco Type L opening (service stair access). The Bilco VersaMount® replaces a damaged roof hatch without re-roofing. Take the cover off the old hatch, set the VersaMount on top of the existing curb, and fasten it with the included anchor clips. Its low-profile curb has a built-in flange and apron for a fast, weathertight install.

    • Opening Size: 30in x 96in
    • Material: Aluminum
    • Shipping Weight: 186 lb
    • Lead Time: Made to order: ships in approximately 2-4 weeks
    • Warranty: 5 years

    Features

    • Fits over the existing curb, so the roof membrane does not have to be disturbed
    • Built-in apron sheds water over the old curb for a watertight installation
    • Stainless steel anchor clips included for a fast, secure mount
    • Compression spring operators counterbalance the cover for smooth one-hand opening at any size
    • Automatic hold-open arm locks the cover open; release it with the grip handle
    • Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
    • Corrosion-resistant construction for years of trouble-free service
    • Heavy-gauge construction and a positive slam latch keep the roof secure

    Specifications

    • Material: 11 gauge aluminum cover and curb
    • Finish: Mill finish aluminum
    • Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
    • Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
    • Curb: 4in high brake-formed hollow-metal curb with 1in concealed fiberglass insulation, 2-5/8in mounting flange and 1-1/2in apron, welded at the corners; stainless steel anchor clips included
    • Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
    • Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
    • Latch: Slam latch with interior and exterior turn handles and padlock hasps
    • Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release

    Options

    Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.

    Documentation

    Ordering & Shipping

    Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.