Overview
This Bilco DSH7272 is a 72in x 72in double leaf automatic smoke vent (galvanized steel). The Bilco Type DSH is a double leaf automatic smoke vent that helps firefighters bring a fire under control by releasing smoke, heat and gases from the building. It is the most economical way to add fire venting over large areas such as warehouses and manufacturing plants.
- Opening Size: 72in x 72in
- Material: Galvanized Steel
- Shipping Weight: 790 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
- Certification: UL-listed automatic smoke vent (UL 793; UL 790 Class A burning brand)
Features
- Thermolatch® II hold/release mechanism for reliable operation in a fire
- Covers release automatically when the UL-listed 165°F (74°C) fusible link melts
- Curb-mounted fusible link housing lets you reset the latch from the roof
- Gas spring operators open the covers against snow and wind, with built-in dampers for a controlled opening
- Fully insulated and gasketed for weather-tightness
- Corrosion-resistant construction; UL-listed standard sizes
Specifications
- Material: 14 gauge galvannealed steel covers and curb
- Finish: Alkyd red oxide primer
- Covers: Brake-formed hollow-metal covers with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 12in high with integral capflashing, 1in fiberboard insulation, welded corners and a 3-1/2in mounting flange
- Gasket: Extruded EPDM rubber gasket permanently adhered to the curb
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Positive hold/release mechanism on one UL-listed 165°F fusible link with a latching point for each cover; holds against 90 psf wind uplift; interior and exterior manual pull-release cables
- Operation: Gas springs open the covers against a 10 psf snow/wind load and lock them open; rated for 50,000 cycles
- Performance: UL-listed; complies with UL 793 and UL 790 Class A (burning brand test)
Documentation
- Type DSH Submittal Drawing (PDF)
- Type DSH Specification (Word)
- Type DSH CAD Details (ZIP)
- Thermolatch Options - Double Leaf Models (PDF)
- Resetting a Smoke Vent Latch (PDF)
- Double Leaf Smoke Vent BIM Model (Revit)
- Smoke Vent Installation Instructions (PDF)
- Smoke Vent Operation & Maintenance (PDF)
- Automatic Smoke Vent Size Chart (PDF)
- Curb Options for Roof Hatches and Smoke Vents (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.
-
Description
Overview
This Bilco DSH7272 is a 72in x 72in double leaf automatic smoke vent (galvanized steel). The Bilco Type DSH is a double leaf automatic smoke vent that helps firefighters bring a fire under control by releasing smoke, heat and gases from the building. It is the most economical way to add fire venting over large areas such as warehouses and manufacturing plants.
- Opening Size: 72in x 72in
- Material: Galvanized Steel
- Shipping Weight: 790 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
- Certification: UL-listed automatic smoke vent (UL 793; UL 790 Class A burning brand)
Features
- Thermolatch® II hold/release mechanism for reliable operation in a fire
- Covers release automatically when the UL-listed 165°F (74°C) fusible link melts
- Curb-mounted fusible link housing lets you reset the latch from the roof
- Gas spring operators open the covers against snow and wind, with built-in dampers for a controlled opening
- Fully insulated and gasketed for weather-tightness
- Corrosion-resistant construction; UL-listed standard sizes
Specifications
- Material: 14 gauge galvannealed steel covers and curb
- Finish: Alkyd red oxide primer
- Covers: Brake-formed hollow-metal covers with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
- Curb: 12in high with integral capflashing, 1in fiberboard insulation, welded corners and a 3-1/2in mounting flange
- Gasket: Extruded EPDM rubber gasket permanently adhered to the curb
- Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
- Latch: Positive hold/release mechanism on one UL-listed 165°F fusible link with a latching point for each cover; holds against 90 psf wind uplift; interior and exterior manual pull-release cables
- Operation: Gas springs open the covers against a 10 psf snow/wind load and lock them open; rated for 50,000 cycles
- Performance: UL-listed; complies with UL 793 and UL 790 Class A (burning brand test)
Documentation
- Type DSH Submittal Drawing (PDF)
- Type DSH Specification (Word)
- Type DSH CAD Details (ZIP)
- Thermolatch Options - Double Leaf Models (PDF)
- Resetting a Smoke Vent Latch (PDF)
- Double Leaf Smoke Vent BIM Model (Revit)
- Smoke Vent Installation Instructions (PDF)
- Smoke Vent Operation & Maintenance (PDF)
- Automatic Smoke Vent Size Chart (PDF)
- Curb Options for Roof Hatches and Smoke Vents (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.