Categories

36in x 36in, Ladder Access Roof Hatch, Miami-Dade Approved, Aluminum, Bilco E-50HZ

Bilco

$2,620.10

36in x 36in, Ladder Access Roof Hatch, Miami-Dade Approved, Aluminum, Bilco E-50HZ

Bilco

BIL-E-50HZ-3636
$2,620.10
Hover Image to Zoom
SKU:
BIL-E-50HZ-3636
UPC:
704521643653
Weight:
123.00 LBS
Shipping:
Calculated at Checkout
See Full Details

Made to order: ships in approximately 2-4 weeks

Adding to cart… The item has been added

Overview

This Bilco E-50HZ is a 36in x 36in ladder access roof hatch (aluminum). The Bilco Type E gives you a 36in x 36in roof opening, a little more room than the usual 36in x 30in hatch. It is used for ladder access and for moving small equipment into or out of the building.

  • Opening Size: 36in x 36in
  • Material: Aluminum
  • Shipping Weight: 123 lb
  • Lead Time: Made to order: ships in approximately 2-4 weeks
  • Warranty: 5 years
  • Certification: Miami-Dade County NOA and Florida Building Commission approved for high-velocity hurricane zones (large and small missile impact)

Features

  • Compression spring operators counterbalance the cover for smooth one-hand opening at any size
  • Automatic hold-open arm locks the cover at 70 degrees for safe ladder access
  • Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
  • Corrosion-resistant construction for years of trouble-free service
  • Heavy-gauge construction and a positive slam latch keep the roof secure
  • Bil-Clip® flashing system on the curb makes securing single-ply roofing membrane fast and simple
  • Order with a Bil-Guard® 2.0 safety railing or a LadderUP® safety post using the options above

Specifications

  • Material: 11 gauge aluminum cover and curb
  • Finish: Mill finish aluminum
  • Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
  • Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
  • Curb: 12in high with integral capflashing, 1in fiberboard insulation, welded corners and a 3-1/2in mounting flange with 7/16in holes for fastening to the roof deck
  • Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
  • Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
  • Latch: Slam latch with interior and exterior turn handles and padlock hasps
  • Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release

Options

Add a Bil-Guard® 2.0 safety railing or a LadderUP® safety post with the options above. Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.

Documentation

Ordering & Shipping

Made to order: ships in approximately 2-4 weeks. Ships direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.

  • Description

    Overview

    This Bilco E-50HZ is a 36in x 36in ladder access roof hatch (aluminum). The Bilco Type E gives you a 36in x 36in roof opening, a little more room than the usual 36in x 30in hatch. It is used for ladder access and for moving small equipment into or out of the building.

    • Opening Size: 36in x 36in
    • Material: Aluminum
    • Shipping Weight: 123 lb
    • Lead Time: Made to order: ships in approximately 2-4 weeks
    • Warranty: 5 years
    • Certification: Miami-Dade County NOA and Florida Building Commission approved for high-velocity hurricane zones (large and small missile impact)

    Features

    • Compression spring operators counterbalance the cover for smooth one-hand opening at any size
    • Automatic hold-open arm locks the cover at 70 degrees for safe ladder access
    • Overlapping cover, welded corners, EPDM gasket and an insulated cover and curb keep the opening weathertight and energy efficient
    • Corrosion-resistant construction for years of trouble-free service
    • Heavy-gauge construction and a positive slam latch keep the roof secure
    • Bil-Clip® flashing system on the curb makes securing single-ply roofing membrane fast and simple
    • Order with a Bil-Guard® 2.0 safety railing or a LadderUP® safety post using the options above

    Specifications

    • Material: 11 gauge aluminum cover and curb
    • Finish: Mill finish aluminum
    • Hardware: Type 316 stainless steel hinges; all other hardware zinc plated and chromate sealed
    • Cover: Brake-formed hollow-metal cover with 1in concealed fiberglass insulation and a 3in beaded overlapping flange, welded at the corners and reinforced for a 40 psf live load
    • Curb: 12in high with integral capflashing, 1in fiberboard insulation, welded corners and a 3-1/2in mounting flange with 7/16in holes for fastening to the roof deck
    • Gasket: Extruded EPDM rubber gasket permanently adhered to the cover
    • Hinges: Heavy-duty pintle hinges with 3/8in Type 316 stainless steel hinge pins
    • Latch: Slam latch with interior and exterior turn handles and padlock hasps
    • Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release

    Options

    Add a Bil-Guard® 2.0 safety railing or a LadderUP® safety post with the options above. Special sizes, stainless steel, curb liners, built-in louvers, fully enclosed curbs, electric or explosion release and lock options are available by quote: call 800-517-1056.

    Documentation

    Ordering & Shipping

    Made to order: ships in approximately 2-4 weeks. Ships direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.