Overview
This Bilco J-3H20 is a 36in x 30in channel frame floor access door (steel). The Bilco Type J H20 is a steel channel-frame floor door reinforced for AASHTO H-20 wheel loads. It is built for outdoor openings where vehicles may cross the door and where water could enter the opening; the channel frame drains to a 1-1/2in coupling.
- Opening Size: 36in x 30in
- Material: Steel
- Load Rating: AASHTO H-20 wheel load (off-street)
- Shipping Weight: 425 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
Features
- Reinforced for AASHTO H-20 wheel loading (off-street locations, not high-density fast-moving traffic)
- Channel frame with 1-1/2in drain coupling for connection to a dry well or drain line
- Engineered lift assistance for easy one-hand operation at any size
- Automatic hold-open arm locks the cover open for safe entry
- Type 316 stainless steel hinges and slam lock
- Structural calculations available on request
Specifications
- Material: 1/4in steel cover and frame (Type 304 or 316 stainless steel available by special order)
- Cover: Diamond-pattern tread plate reinforced for H-20 wheel loading in off-street locations
- Frame: Formed channel frame with a full anchor angle welded around the perimeter and a 1-1/2in drain coupling
- Hinges: Heavy forged Type 316 stainless steel hinges with 1/4in Type 316 stainless steel pins
- Latch: Type 316 stainless steel slam lock with fixed interior handle and removable exterior turn/lift handle; latch release protected by a flush, gasketed, removable screw plug
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
- Finish: Alkyd red oxide primer
- Hardware: Type 316 stainless steel hinges, slam lock and fasteners; other hardware zinc plated and chromate sealed
Documentation
- Type J H20 Submittal Drawing (PDF)
- Type J H20 Specification (Word)
- Type J H20 CAD Details (ZIP)
- Floor Door Size Chart - Drainage Doors (PDF)
- Floor Access Door Installation Instructions (PDF)
- Floor Access Door Operation & Maintenance (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.
-
Description
Overview
This Bilco J-3H20 is a 36in x 30in channel frame floor access door (steel). The Bilco Type J H20 is a steel channel-frame floor door reinforced for AASHTO H-20 wheel loads. It is built for outdoor openings where vehicles may cross the door and where water could enter the opening; the channel frame drains to a 1-1/2in coupling.
- Opening Size: 36in x 30in
- Material: Steel
- Load Rating: AASHTO H-20 wheel load (off-street)
- Shipping Weight: 425 lb
- Lead Time: Made to order: ships in approximately 2-4 weeks
- Warranty: 5 years
Features
- Reinforced for AASHTO H-20 wheel loading (off-street locations, not high-density fast-moving traffic)
- Channel frame with 1-1/2in drain coupling for connection to a dry well or drain line
- Engineered lift assistance for easy one-hand operation at any size
- Automatic hold-open arm locks the cover open for safe entry
- Type 316 stainless steel hinges and slam lock
- Structural calculations available on request
Specifications
- Material: 1/4in steel cover and frame (Type 304 or 316 stainless steel available by special order)
- Cover: Diamond-pattern tread plate reinforced for H-20 wheel loading in off-street locations
- Frame: Formed channel frame with a full anchor angle welded around the perimeter and a 1-1/2in drain coupling
- Hinges: Heavy forged Type 316 stainless steel hinges with 1/4in Type 316 stainless steel pins
- Latch: Type 316 stainless steel slam lock with fixed interior handle and removable exterior turn/lift handle; latch release protected by a flush, gasketed, removable screw plug
- Lift Assistance: Compression spring operators in telescopic tubes; automatic hold-open arm with grip-handle release
- Finish: Alkyd red oxide primer
- Hardware: Type 316 stainless steel hinges, slam lock and fasteners; other hardware zinc plated and chromate sealed
Documentation
- Type J H20 Submittal Drawing (PDF)
- Type J H20 Specification (Word)
- Type J H20 CAD Details (ZIP)
- Floor Door Size Chart - Drainage Doors (PDF)
- Floor Access Door Installation Instructions (PDF)
- Floor Access Door Operation & Maintenance (PDF)
Ordering & Shipping
Made to order: ships in approximately 2-4 weeks. Ships by freight direct from the Bilco factory; shipping is calculated at checkout. Need a special size, a different finish or help choosing? Call us at 800-517-1056.